Temperature Setpoint Policy
This policy applies to all occupants of facilities owned or operated by Liberty University and its subsidiaries.
Building Design Standards
Occupied Building Temperature Setpoints
The temperature controls only adjust to temperature changes at the temperature sensor location, so adjacent spaces without a sensor may be warmer or cooler. Where spaces are equipped with sensors that allow setpoint adjustment above and/or below the seasonal setpoints, the occupants of those spaces should be respectful in considering other building occupants before making temperature adjustments. Where spaces are equipped with sensors that allow setpoint adjustment, the heating setpoint may be set lower than indicated above, and the cooling setpoint may be set higher than indicated above.
Note that it is the responsibility of employees and students to dress appropriately for the weather conditions.
Unoccupied Building Temperature Setpoints
Facilities Management coordinates with the Events Dept. and Facility Managers to determine the hours of operation for each facility. These hours of operation are the basis for the occupied/unoccupied schedule.
Some examples are the Ice Center, Natatorium, Cadaver Labs and Server Rooms. These spaces/venues are an exception to this policy as they are engineered to operate at special setpoints.
University buildings are designed in accordance with the Virginia Uniform Statewide Building Code (VUSBC) which incorporates by reference the International Mechanical Code (IMC), the International Energy Conservation Code (IECC) and ASHRAE 90.1 (Energy Standards for Buildings).
To establish a uniform policy for building heating and cooling temperature setpoints aligned with the building code, industry accepted standards and energy efficient operation.
Definition of Glossary Terms
ASHRAE: American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE, pronounced ash-ray) was founded in 1894 and has more than 50,000 members worldwide. This non-profit industry standards organization focuses on building systems, energy efficiency, indoor air quality, refrigeration and sustainability technologies. ASHRAE publishes a set of standards and guidelines relating to HVAC systems and issues, that are often referenced in building codes and used by consulting engineers, mechanical contractors, architects, and government agencies.
HVAC: Heating, ventilating and air conditioning
Temperature sensor: A temperature measurement device, usually wall-mounted, which provides feedback to the temperature control system so it can modulate HVAC heating and cooling valves or relays in an effort to match the air temperature near the sensor to the sensor setpoint
Special Medical Conditions
If an employee or student has a documented medical condition that requires an exception to the temperature setpoint policy, then they may submit a formal request to their supervisor (in the case of employees) or Resident Life (in the case of students) for an exception.
Requests will be evaluated using these basic criteria:
The outcome of an evaluation may result in any one of the following:
Supplemental heating or cooling may be considered with Senior University Administration Approval.